Humid-1Wire – Capteur d’humidité – 1 mètre

71.00  Ht

UGS : AF-600487 Catégorie :

Description

Précision: ± 4% d’humidité relative, distance max de 10m, bus: 1-Wire, construction: câble de 1,3 ou 10 m de long, connecteur: RJ12.

  • Mesure de  l’humidité relative (0 to 100%)
  • jusqu’à 10 capteurs
  • Chaque capteur a son adresse ID
  • Utilisation avec Poseidon (SNMP thermometer)
  • Utilisation avec HWg-STE (WEB thermometer)

Description Technique :

 

Himid-1Wire humidity sensor parameters
+ Range 0% to 100% of relative humidity
+ Accuracy ±2% RH, 0-100% RH non-condensing, 25 °C
+ Communication 1-Wire bus
+ Communication line 1-Wire (Data, GND, +5V)
+ Supporting elements 47kOhm Pull-up resistor, power capacity 100nF
+ Sensor connector RJ11 or 2x RJ12 female
+ Length of the connecting cable According to order number

 

 

 

Humid-1Wire connectors
Connector Pin Direction Description
RJ12 RJ11
3 2 Data <-> Data 1-Wire
4 3 GND System Ground
5 4 +5V Power supply
 

 

 

Notice: RJ11 connector is identical with the RJ12 connector. The only difference is that the RJ11 uses only 4 middle conductors and the RJ12 uses 6.

 

How to connect more sensors:

Up to 10 sensors of 1-Wire type can be parallel connected, maximum total leg ht of the wiring is 10 meters. Use Poseidon T-Box (600 040).

Downloads & Documentation

Informations complémentaires

Poids 0.3 kg